TONELLO Machinery in India Authorized Distributor — Magnum Resources
Tonello has built garment finishing machinery in Sarcedo, Italy since 1981: industrial washing and dyeing, THE Laser 2.0 waterless finishing and EGO ozone treatment that cut water and chemical use. Magnum Resources is the authorized Tonello distributor in India.
About Tonello
Tonello is an Italian name in garment treatment and textile finishing, known for washing, dyeing, laser finishing, ozone treatment, nebulization and industrial drying systems. Technologies such as THE Laser, DyeMate, EGO and CORE are built for factories that need consistent denim and garment effects with lower water, chemical and energy use.
For Indian laundries and garment exporters, Tonello is not just a machine choice; it is a process upgrade for sampling, bulk finishing and repeatable shade control. Magnum Resources supports Tonello projects with process discussion, customs clearance, installation, operator training, AMC and genuine spare parts for denim washing, garment dyeing, laser finishing and sustainable finishing lines.
Tonello Finishing Technology Range
Tonello covers five areas of garment finishing: industrial washing and dyeing machines, THE Laser 2.0 for dry laser finishing, EGO for ozone-based treatment, CORE 2.0 for nebulization-based application, and in-house designed industrial dryers. Each category is available with pre-sales process consultation, installation and AMC support from Magnum Resources.
Tonello G1 420 LD3 Garment Dyeing Machine
View Machine Details
Tonello O-Zone Ozone Garment Finishing Machine
View Machine Details
Tonello The Laser C Conveyor Garment Laser Machine
View Machine Details
Tonello The Laser TM Denim Laser Finishing Machine
View Machine DetailsWhere TONELLO Machines Are Used
TONELLO systems are deployed across India and worldwide in these industries. Each application is backed by Magnum Resources with industry-specific consultation and full after-sales service across India.
Denim Manufacturing & Finishing
Laser distressing, indigo dyeing, enzyme washing and ozone fading for denim jeans, jackets and shirts. THE Laser 2.0 replaces manual stone-wash and bleaching steps. DyeMate automates the indigo dyeing cycle for consistent shade repeatability across bulk production.
Export Garment Manufacturing
Industrial garment washing and finishing for export-oriented manufacturers supplying European and US buyers. Tonello's documented water and chemical savings help meet the sustainability audit requirements increasingly required by international garment buyers.
Sustainable & Eco Apparel Production
Brands and manufacturers building waterless or low-water garment finishing capability. EGO ozone treatment and CORE 2.0 nebulization reduce process water and chemical discharge significantly versus conventional wet finishing lines.
Luxury & High-End Fashion
Precise garment treatment for luxury denim and premium fashion finishing. THE Laser 2.0's CREA software enables repeatable graphic and distressing effects at sampling accuracy, which is what luxury brands require for consistent seasonal execution.
Sportswear & Activewear
Finishing of performance fabrics, technical garments and activewear. Ozone treatment with EGO delivers surface effects and decoloration on synthetic blends without the chemical loading that conventional bleaching puts on technical fabrics.
Fabric Dyeing & Piece Goods
Industrial washing and dyeing for piece-goods manufacturers, fabric processors and vertical mills running garment-dyed programmes. DyeMate handles VAT and sulfur dye processes in addition to indigo.
Laundry & Garment Processing Services
Commercial garment laundries and processing units offering washing, dyeing and finishing services to garment manufacturers. Tonello's range covers the full service menu from washing and dyeing to laser finishing and ozone treatment.
Industry Solutions Where TONELLO Plays a Role
TONELLO machines are the backbone of these Magnum Resources industry solutions. Click through to see the full solution stack.
Why Tonello
What makes TONELLO the right partner for serious industrial production, and why customers across India keep choosing them.
THE Laser 2.0 — Dry Denim Finishing
Laser distressing replaces stone washing, bleaching and manual hand-scraping in denim finishing. No water, no chemicals, no inconsistency between pieces. Tonello says THE Laser 2.0 is the fastest and most precise laser on the market for garment production — it handles both sample development and bulk production on the same machine, running CREA design software.
DyeMate — Patented Dyeing Automation
DyeMate automates indigo, VAT and sulfur dyeing cycles with machine-controlled dye concentration and application timing. Manual dyeing produces shade variation between batches. DyeMate produces repeatable results run to run — which matters for manufacturers supplying buyers with tight shade tolerance requirements.
EGO — Three Ozone Technologies in One
The EGO system combines ozone dissolved in water, ozone applied in air and Tonello's patented OBleach process in a single machine. That combination delivers a wider range of surface effects than any single ozone method. For manufacturers replacing conventional bleach lines, EGO is the direct substitute.
CORE 2.0 — 80% Less Chemical
CORE 2.0 applies dyes and finishing agents in micro-mist (nebulization) rather than bath immersion. Tonello's stated saving is up to 80% on chemical products versus conventional processing. For Indian garment plants under pressure from buyers and regulatory agencies to reduce effluent load, that is a directly auditable improvement.
Configurator — Design Before You Buy
Tonello's digital Configurator tool lets buyers design their finishing laundry setup virtually — choosing machines, technologies and accessories — and generates a realistic projection of future energy and resource consumption before any purchase commitment. For Indian manufacturers planning a new finishing line, that projection replaces guesswork with comparable data.
40 Years of Finishing Engineering
Tonello has been doing garment finishing since 1981. The DyeMate and OBleach patents, the CREA software and the EGO multi-ozone architecture are all outcomes of sustained R&D in one domain. General industrial machinery suppliers do not have this depth of garment finishing process knowledge.
Why Magnum Resources for Tonello
A principal is only as good as the partner supporting them in your country. Here's what we bring to your TONELLO purchase.
Magnum Resources is the authorized Tonello distributor in India. We provide pre-sales garment finishing process consultation, customs clearance, on-site installation, operator training, AMC contracts and genuine spare parts for Tonello washing, laser, ozone and dyeing system installations across India.
Buying TONELLO in India — Quick Answers
Yes. Magnum Resources is the authorized India distributor for Tonello S.r.l., Italy. We cover the full Tonello range: industrial garment washing and dyeing machines, THE Laser 2.0 laser finishing system, EGO ozone treatment, CORE 2.0 nebulization and industrial dryers. We handle sales, customs clearance, installation, operator training, AMC and spare parts across India.
THE Laser 2.0 creates distressing, abrasion, whisker and graphic effects on denim garments using a laser beam — no water, no chemicals, no manual scraping or stone washing. The machine runs CREA design software, which lets operators program effect patterns digitally and replicate them consistently across every piece in a production run. It handles both sample development and bulk production on the same unit. For denim manufacturers, this replaces several wet-processing steps with a single dry process.
DyeMate is Tonello's patented garment dyeing system. It automates the application cycle for three dye types: indigo (for denim), VAT dyes and sulfur dyes. The system controls dye concentration, application timing and process conditions automatically — removing the variability that comes with manual dye bath management. The result is consistent shade repeatability batch to batch, which is the primary requirement for manufacturers supplying buyers with strict shade-tolerance specifications.
EGO (Enhanced Garment Ozonation) combines three technologies in one machine: ozone dissolved in water for wet ozone finishing, ozone applied in air for dry ozone effects, and Tonello's patented OBleach process for controlled surface decoloration. Together they produce a wider range of finishing effects than single-method ozone systems. For manufacturers replacing conventional chlorine bleach lines, EGO is a direct substitute with a significantly lower environmental impact.
CORE 2.0 applies dyes and finishing products as a micro-mist (nebulization) rather than in a conventional bath. Tonello states the system saves up to 80% on chemical products compared to standard processing. Water consumption is also reduced because the process does not require a full immersion bath. For Indian garment plants operating under effluent treatment requirements or supplying buyers with sustainability scorecards, both figures are directly measurable and auditable.
Yes. We handle customs clearance, on-site installation, commissioning, operator training, preventive maintenance contracts (AMC) and genuine Tonello spare parts supply across India. Pre-sales process consultation is part of our service — we review your current finishing process before specifying the appropriate Tonello system.
Tell Us About Your TONELLO Requirement
Share a few details about your production — fabric type, daily output target, eyelet specification, factory location. Our team will respond within one business day with the right TONELLO model recommendation, technical datasheet, and indicative pricing for your scale of operation.
Complete Your Production Line
Pair TONELLO with these related principals from the Magnum Resources HTT division to build a complete, integrated production line.