Authorised India Distributor
Tonello The Laser DUAL Dual-Source Denim Laser Machine
Official manufacturer page: tonello.com
Mark both legs of a garment at once on a mannequin station with two laser sources, cutting marking time by up to half for high-volume jeans finishing. The Tonello The Laser DUAL is built in Italy and supplied, installed and supported across India by Magnum.
2 Sources
Dual Laser Heads
Up to 50%
Less Marking Time
360°
Laser Effect
Italy
Country of Origin
12-16 weeks
Typical Lead Time
600 W
Laser Power
Factory-Backed
Install & Training
Overview
About this machine
What The Laser DUAL does
The Tonello The Laser DUAL is a dual-source laser machine for denim and garments. Its mannequin workstation carries two laser sources that mark the garment at the same time, so both legs are processed at once and marking time drops by up to half against a single-source laser. The 360 degree effect wraps the whole garment, and CREA turns each design into a repeatable file.
Doubling the laser sources doubles the work the station does in the same time, which is why it suits jeans finishers running high daily volumes who want the most output from one workstation.
Built for high-throughput jeans finishing
The Laser DUAL suits denim laundries and jeans finishers with high daily volumes, vintage and worn-in specialists working in three dimensions, and finishing units consolidating output onto fewer, faster stations. The process is dry and chemical-free, so it replaces hand-sanding, PP spray and bleach for the effect and keeps water, effluent and worker exposure down.
Industries that use The Laser DUAL
- Denim and jeans: high-volume fades, whiskers and distressing in 360 degrees.
- Garment washing and finishing: consolidating laser output onto a faster station.
- Vintage and worn-in specialists: three-dimensional effects on the whole garment.
- Fashion and casualwear: graphics and patterns at high throughput.
Why source The Laser DUAL through Magnum
Magnum is the authorised India partner for Tonello, the Italian garment-finishing specialist. We confirm the configuration with the factory, bring the machine in, clear customs, install it on your floor and train your team on the CREA design software, then keep optics and service with us in India. If you are pushing high jeans volumes and want maximum output from one station, talk to our engineers and we will come back with real specs, a lead time we can hold to and a quotation matched to your throughput.
Specifications
Technical data
Specifications are supplied by the manufacturer. Custom configurations available. Speak to our engineers.
Request Full DatasheetLaser
Sources
Dual laser source system
Power
600 W
Effect
360 degree laser marking
Workstation
Type
Mannequin workstation
Processing
Marks both legs at the same time
Software
CREA
Tonello laser design and production software
Productivity
Marking Time
Reduced by up to 50% versus a single source
Output
Doubles process productivity on the station
Build
Construction
Solid, compact design
Manufacturer
Tonello S.r.l., Sarcedo (Vicenza), Italy
Return on Investment
What this machine saves you
The numbers Indian manufacturers use to justify the CAPEX internally.
Up to 50%
Less Marking Time
Two laser sources work the garment at once, so marking time drops by up to half against a single-source machine and the station clears more pieces per shift.
360°
Full Coverage
The mannequin workstation gives a 360 degree effect, so fades and distressing wrap the whole garment instead of one flat face.
Double
Process Productivity
Doubling the laser sources doubles the work the station does in the same time, which suits jeans finishers running high daily volumes.
Complete Package
What's included with every machine
From factory to running on your floor, Magnum handles it end to end.
The Laser Machine
Factory-tested at Tonello in Italy before dispatch
Import & Customs
Freight and clearance to your site, handled by Magnum
Installation & Setup
Coordinated by Magnum with OEM-backed engineers
CREA Software Training
On-site training on the CREA design software at start-up
Factory-Supplied Optics
Genuine optics and wear parts sourced to order from Tonello
Technical Support
Remote and OEM-backed support after start-up
Buying Through Magnum
One accountable partner, from quote to first laser file
Magnum is the authorised India partner for Tonello, the Italian garment-finishing specialist. Laser power and processing mode depend on the fabrics and effects you run, so we settle the configuration with the factory first. We bring the machine in, clear customs, install it on your floor and train your team on the CREA design software. Optics and service then come back to us, not an overseas desk.
Authorised India Partner
A direct line to Tonello in Italy for specification, pricing and process support.
One Point of Accountability
A single team for sourcing, import, customs, installation and training.
On-Site Installation & Training
OEM-backed engineers set the machine up and train your team in person.
Factory-Supplied Optics
Genuine optics and wear parts sourced directly from Tonello.
Key Features
Engineering deep-dive
For maintenance teams and production engineers who want to look under the hood.
Cuts marking time by up to 50% against a single-source laser
Mannequin workstation with a 360 degree laser effect across the whole garment
600 W laser power for high-throughput finishing
CREA software turns a design into a repeatable laser file
Doubles process productivity from a single workstation
Waterless and chemical-free: replaces hand-sanding, PP spray and bleach for the effect
Solid, compact design, built in Italy by Tonello and supported across India by Magnum
Documentation
Technical downloads
Brochures, datasheets and guides, available on request.
FAQs
Questions Indian buyers ask us
Common questions Indian buyers ask us, answered upfront.
High-volume denim laundries and jeans finishers, vintage and worn-in specialists working in three dimensions, and units consolidating laser output onto fewer, faster stations. It is built for maximum output from one workstation.
Two laser sources work the garment at the same time on a mannequin workstation, marking both legs at once. That reduces marking time by up to 50% against a single-source machine and doubles the work the station does in the same time.
The mannequin workstation lets the laser wrap the whole garment, so fades and distressing run in three dimensions across the front, back and sides rather than on one flat face.
The Laser DUAL runs at 600 W. We help you confirm the right setup for your fabrics and effects with the factory.
Yes. CREA applies the design from a digital file, so the effect repeats exactly across the run instead of drifting from one operator to the next.
No. The laser marks the fabric with light, so the process is dry and chemical-free, replacing hand-sanding, PP spray and bleach for the effect and cutting water, effluent and worker exposure.
Price depends on the configuration, so we quote each project individually. Typical lead time is around 12 to 16 weeks including manufacture, freight and customs, after which Magnum coordinates installation and operator training in India.
Magnum is the authorised India partner for Tonello. We source the machine from the factory, manage freight and customs, coordinate installation and start-up with OEM-backed engineers, train your team on the CREA software, and supply genuine optics and wear parts to order.
Engagement options
Evaluate Tonello The Laser DUAL Dual-Source Denim Laser Machine on your terms
Capex decisions deserve a serious conversation. Pick the channel that fits your stage, whether you're specifying, validating or still scoping. Each one routes to the right person on our team within one business day.
Request a Quotation
Configured pricing with lead time, installation, spares and AMC. Detailed proposal in one business day.
Application Engineer Call
30-minute technical review of throughput, substrate compatibility and integration with your existing line.
WhatsApp the Sales Desk
Fastest channel for spec sheets, brochures and quick clarifications. Replies during business hours.
See the Machine Running
Arrange a factory demonstration or a recorded run of this machine on your material.
Enquire
Talk to a Magnum specialist
Tell us about your production line and what you're trying to achieve. We'll come back within one business day with pricing, lead time and any technical questions answered.