Authorised India Distributor
LIDEM TR & TRS Industrial Shredding Mill
Official manufacturer page: lidem.com
Shred foam, textiles, plastics and fibre waste back into reusable material on a high-capacity mill up to 1,500 kg/h, with interchangeable sieves and belt or hopper feed. The LIDEM TR & TRS is a Spanish-built industrial shredding mill, supplied, installed and supported across India by Magnum.
Up to 1,500 kg/h
Throughput
550 / 870 mm
Working Width
8 to 10 mm
Output Size
Spain
Country of Origin
12-16 weeks
Typical Lead Time
CE
Build & Certification
Factory-Backed
Install & Training
Overview
About this machine
What the TR / TRS shredding mill does
The TR and TRS are industrial shredders built for recycling and material recovery. Material is fed in by a variable-speed conveyor belt or a hopper, torn down by the rotor, and sized by an interchangeable sieve, so the same mill produces a coarse or fine output depending on the screen fitted. A built-in fan moves the shredded fibre to a bag or the next stage.
Buyers know this kind of machine by several names: an industrial shredder, a crushing mill, a foam crusher, a textile shredder or a recycling mill. If you searched for any of those, this is the machine that does the work.
Built for high-volume recycling
The TR55 (550 mm) and TR87 (870 mm) cover the higher end of LIDEM's shredding range, processing up to roughly 1,000 and 1,500 kg/h. The TRS variant is configured for heavier, continuous recycling duty. Reduced power draw for the throughput is a core part of the design, so the running cost per tonne stays low across a full shift.
Materials the TR / TRS shreds
- Foam and bedding: flexible foam, latex, viscoelastic, rebonded foam, padding, wadding and end-of-life mattresses.
- Textiles: woven and knitted fabric, carpets, nonwovens, wool and clothing offcuts.
- Plastics: PET bottles, films, raffia, big bags and laminated plastics.
- Technical waste: fibreglass and composite offcuts, paper and documents, agricultural film.
Why source the TR / TRS through Magnum
Magnum is the authorised India distributor for LIDEM, whose Ontinyent factory builds shredding, cutting and recycling machinery. We size the right model, sieve set and feed system for your material and tonnage with the factory, handle the import and customs, install the mill and train your team. LIDEM machines also support a live remote link to the factory for diagnostics, which we set up at start-up, and we keep service in India rather than passing you to an overseas help desk.
Built For
Who the TR & TRS shredder is built for in India
A high-capacity shredding mill for recyclers and manufacturers turning bulky waste back into reusable fibre, whether you process foam, textiles, plastics or technical offcuts. Find where you fit below.
High-Volume Foam & Mattress Recyclers
Crush end-of-life foam, latex and mattresses back into clean fibre for cushion and upholstery filling, at full production tonnage.
Textile, Carpet & Nonwoven Recycling
Tear woven and knitted fabric, carpets, nonwovens and wool offcuts into reusable fibre for recycling and re-manufacture.
Plastics, PET & Big-Bag Recycling
Reduce PET bottles, films, raffia and big bags to a uniform size for downstream washing, pelletising or re-use.
Fibreglass & Composite Offcut Recovery
Break fibreglass and composite production offcuts down to a handleable size for recovery rather than landfill.
Specifications
Technical data
Specifications are supplied by the manufacturer. Custom configurations available. Speak to our engineers.
Request Full DatasheetCapacity & Width
Working Width
550 mm (TR55) / 870 mm (TR87)
Throughput
Up to ~1,000 kg/h (TR55), ~1,500 kg/h (TR87)
Output Size
~8 to 10 mm, set by interchangeable sieve
Feed & Sizing
Feed System
Variable-speed conveyor belt or hopper with decompressor
Sieves
Interchangeable for coarser or finer output
Material Transport
Integrated fan to bag or next stage
Materials
Handled
Foam, latex, viscoelastic, mattresses, textiles, carpets, nonwovens, PET, paper, raffia, big bags, fibreglass, agricultural film
Build & Support
Manufacturer
LIDEM, Spain
TRS Variant
Configured for heavier, continuous recycling duty
Support
Remote link to the LIDEM factory for diagnostics
Return on Investment
What this machine saves you
The numbers Indian manufacturers use to justify the CAPEX internally.
Up to 1,500kg/h
Throughput
A high-capacity rotor and up to 1,500 kg/h mean bulky waste is reduced at production volume on one mill, instead of being trickled through an undersized machine.
One
Mill For Many Materials
Foam, textiles, plastics, paper and fibreglass run through the same mill, with the sieve setting the output, so a recycler does not need a separate machine for each waste stream.
Low kWh/tonne
Energy Per Tonne
An energy-efficient drive keeps the power draw per tonne low across a full shift, so the running cost stays down on long recycling runs.
Complete Package
What's included with every machine
From factory to running on your floor, Magnum handles it end to end.
The Shredding Mill
Factory-tested at the LIDEM plant in Spain before dispatch
Import & Customs
Sea freight and customs clearance to your site, handled by Magnum
Installation & Setup
Coordinated by Magnum with factory-backed engineers
Operator Training
On-site run-in and operator training at start-up
Factory-Supplied Spares
Blades, sieves and wear parts sourced to order from LIDEM
Technical Support
Remote diagnostics from the LIDEM factory after start-up
Buying Through Magnum
One accountable partner, from quote to first shred
Magnum is the authorised India distributor for LIDEM, whose Ontinyent factory builds shredding, cutting and recycling machinery. We size the model, sieve set and feed system for your material and tonnage with the factory, manage import and customs, install the mill and train your team, then set up the remote link to Spain for diagnostics. Service and spares stay with us in India.
Authorised India Distributor
A direct line to LIDEM in Spain for specification, sieve selection and engineering support.
One Point of Accountability
A single team for sourcing, import, customs, installation and training.
On-Site Installation & Training
Factory-backed engineers set the mill up and train your operators in person.
Factory-Supplied Spares
Genuine blades, sieves and wear parts sourced directly from LIDEM.
Key Features
Engineering deep-dive
For maintenance teams and production engineers who want to look under the hood.
Throughput up to about 1,500 kg/h, with the TRS configured for heavier continuous duty
Interchangeable sieves set the output size, typically down to 8 to 10 mm
Variable-speed conveyor belt or hopper feed with decompressor for steady loading
Shreds foam, latex, viscoelastic, textiles, carpets, PET, paper, raffia, big bags and fibreglass
Integrated fan moves the shredded fibre to a bag or the next stage of the line
Energy-efficient drive that keeps running cost per tonne low across a full shift
Built in Spain by LIDEM, supplied, installed and supported across India by Magnum
Documentation
Technical downloads
Brochures, datasheets and guides, available on request.
FAQs
Questions Indian buyers ask us
Common questions Indian buyers ask us, answered upfront.
It suits recyclers and manufacturers processing bulky waste at volume: foam and mattress recyclers, textile and carpet recyclers, plastics and PET processors, and plants recovering fibreglass or production offcuts. The TR55, TR87 and TRS cover the higher-capacity end of the LIDEM shredding range.
Foam, latex and viscoelastic, padding and mattresses, woven and knitted textiles, carpets, nonwovens and wool, PET bottles, films, raffia and big bags, fibreglass and composite offcuts, paper and documents, and agricultural film. One mill handles all of them with the right sieve.
Throughput depends on the material, the output size and the model. As a guide the TR55 (550 mm) runs up to around 1,000 kg/h and the TR87 (870 mm) up to around 1,500 kg/h. We confirm a realistic figure for your material with the factory.
By the sieve fitted under the rotor. The TR and TRS use interchangeable sieves, so you set a coarser or finer output, typically down to about 8 to 10 mm, by swapping the screen. No other change to the machine is needed.
Price depends on the model, sieve set, feed system and accessories, so we quote each project individually. Typical lead time is around 12 to 16 weeks including manufacture, sea freight and customs, after which Magnum coordinates installation and operator training in India.
Magnum is the authorised India distributor for LIDEM. We size the right machine with the factory, manage freight and customs, install the mill, train your operators, and set up the live remote link to LIDEM in Spain for diagnostics. Service and spares stay with us in India.
Engagement options
Evaluate LIDEM TR & TRS Industrial Shredding Mill on your terms
Capex decisions deserve a serious conversation. Pick the channel that fits your stage, whether you're specifying, validating or still scoping. Each one routes to the right person on our team within one business day.
Request a Quotation
Configured pricing with lead time, installation, spares and AMC. Detailed proposal in one business day.
Application Engineer Call
30-minute technical review of throughput, substrate compatibility and integration with your existing line.
WhatsApp the Sales Desk
Fastest channel for spec sheets, brochures and quick clarifications. Replies during business hours.
Visit a Reference Installation
Tour a working line at a nearby Indian customer site. Coordinated subject to host approval.
Enquire
Talk to a Magnum specialist
Tell us about your production line and what you're trying to achieve. We'll come back within one business day with pricing, lead time and any technical questions answered.